SELTERM 2 Pack 4 Gauge 4 AWG 3/8″ Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

#ad
SELTERM #ad - Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product. The copper lugs also meet S. A. E conductivity standards and are RoHS compliant. Close end pad seals Out Moisture Keeping Cables Dry. Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard.

Can be Crimped or Soldered. Ul tested & Approved. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Heavy duty construction for Enhanced High Temperature Durability. Lugs are suitable for use with Welding Cables and Battery Cables. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard.

SELTERM 2 Pack 4 Gauge 4 AWG 3/8" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug #ad - Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed.

#ad



Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft

#ad
Young4us 43237-2 #ad - Package content: 1 x heat shrink tubingblack 1. 22m4ft 1 x heat shrink tubingred1. 22m4ft material: polyolefin. Rated voltage: 600V. Product advantages: durable structure with fast heat-shrinkage, high heat-shrinkable ratio, strong heat-shrinkable stress. The young4us durable heat shrink tubes are made from polyolefin, the internal layer is coated by hot-melt adhesive, which resist to harsh environment and have a high heat-shrinkable ratio of 3:1, which has satisfied bonding performance.

Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. These tubes are suitable for bundling, electrical insulation, mechanical protection and wire joints etc. The tubes have the advantages of good insulativity, metal pipeline and electrical wire and cable, seal, water proofing, which can be widely used in wiring, excellent corrosion resistance and abrasion performance, corrosion prevention and insulation protection for electronic component, etc.

Young4us 2 Pack 3/4'' Heat Shrink Tube 3:1 Adhesive-Lined Heat Shrinkable Tubing Black&RED 4Ft #ad - Main color: black & red. Our tubes are with standard of RoHS and you can use heat gun, alcohol lamp, lighter or air drier to heat them. Shrink ratio: 3:1, round diameter: 3/4'', Length: 1. 22m4ft.

#ad



IWISS Battery Cable Lug Crimping Tool from AWG 8-1/0 with Cable Cutter

#ad
Iwiss Electric Co.,ltd HX-50B #ad - Every authentic iwiss product comes with a lased IWISS logo, designed package and/or a QR code sticker on the box. Main color: black & red. 390 mm width of crimper: approx. 1. 3 kg material of crimper: metal setting levels of crimper: 8, 2, 6, 1/0 awg contents include: 1x Crimping Tool1 X Cable Cutter Official IWISS Counterfeit Warning: More and more frequently, 4, 1, counterfeit IWISS products are offered for sale through Internet or directly.

14. 2 cm thickness of crimper: approx. Description of crimper: the crimber is robust and in high quality Crimper is lightweight and easy to carry Technical Information for crimper: Length of crimper: approx. Material: polyolefin. Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C.

IWISS Battery Cable Lug Crimping Tool from AWG 8-1/0 with Cable Cutter #ad - Iwiss team kindly remind you not to be tricked, and to report indecent selling outside Amazon IWISS exclusive store. Ergonomics design】 anti-slip rubber coated handle for a more comfortable and saving labor work. Rotate crimp dies】 the tool has 6 dies of 8, 1, 6, 4, 2, 1/0 awg, using rotating heads with a spring loaded locking pin to keep the heads.

Durable】 crimper is made of scm-40 hardened steel for a durable and long service life use.

#ad



TEMCo Hammer Lug Crimper Tool 5 Year Warranty

#ad
TEMCo TH0007 #ad - Once the terminal completely envelopes the wire, the crimper will not move and when struck will feel "solid". Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. How to use crimper: STEP 1 Place terminal in jaw of crimper. Material: polyolefin. Terminal Type: Uninsulated.

Wire gauge: 8 awg, 2/0, 4 awg, 1/0, 2 awg, 6 awg, 1 awg, 3/0 and 4/0. Ideal for Battery and Welding Cables. Temco industrial's 1 year free Return and 5 Year Void-Free Warranty. Also works well in a shop vise. Crimping type: Indent. Shrink ratio: 3:1, round diameter: 3/4'', Length: 1. 22m4ft. Ergonomics design】 anti-slip rubber coated handle for a more comfortable and saving labor work.

TEMCo Hammer Lug Crimper Tool 5 Year Warranty #ad - Rotate crimp dies】 the tool has 6 dies of 8, 1/0 awg, 6, 2, 1, 4, using rotating heads with a spring loaded locking pin to keep the heads. Durable】 crimper is made of scm-40 hardened steel for a durable and long service life use. Rated voltage: 600V. We specially thicken and reinforce the metal plate on crimp head.

#ad



IWISS Cable Lug Crimping Tool for Heavy Duty Wire Lugs,Battery Terminal,Copper Lugs AWG 8-1/0

#ad
IWISS TOOLS CECOMINOD088102 #ad - Shrink ratio: 3:1, round diameter: 3/4'', Length: 1. 22m4ft. Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. This tool has widely application in automatic electronics work. Manual hammer crimper: recommend 2-4 lb sledge hammer. Main color: black & red.

14. 2 cmthickness of crimper: approx. Rated voltage: 600V. 39. 5 cmwidth of crimper: approx. We specially thicken and reinforce the metal plate on crimp head. Easy operation】 press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.

IWISS Cable Lug Crimping Tool for Heavy Duty Wire Lugs,Battery Terminal,Copper Lugs AWG 8-1/0 #ad - High precision jaw design】 crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. The mould of the crimping dies is made of hardened tool steel. 4. 2 cmweight of crimper: approx. It is with the characteristics of long life, accurate bore diameter and good crimping effect.

Description of crimper: The crimber is robust and in high quality Crimper is lightweight and easy to carry. Technical information for crimper: Length of crimper: approx.

#ad



TEMCo WC0180-50' 25' Blk, 25' Red 2 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK + RED | MADE IN USA

#ad
TEMCo #ad - Maximum conductor operating temperature is 105°C in circuits not exceeding 600 volts. Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. Ergonomics design】 anti-slip rubber coated handle for a more comfortable and saving labor work. Rotate crimp dies】 the tool has 6 dies of 8, 1, 6, 2, 4, 1/0 awg, using rotating heads with a spring loaded locking pin to keep the heads.

Durable】 crimper is made of scm-40 hardened steel for a durable and long service life use. Minimum temperature rating -50°C. We specially thicken and reinforce the metal plate on crimp head. Easy operation】 press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.

TEMCo WC0180-50' 25' Blk, 25' Red 2 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK + RED | MADE IN USA #ad - High precision jaw design】 crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. 30 bare copper conductor insulated with high grade EPDM. Example, if a 10 ft length and a 25 ft length are bought, then you would receive 35 ft on one but cut into the lengths that are bought.

Terminal Type: Uninsulated. Wire gauge: 8 awg, 2 awg, 6 awg, 4 awg, 2/0, 1/0, 1 awg, 3/0 and 4/0.

#ad



SELTERM 2 Pack 4 Gauge 4 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets

#ad
SELTERM #ad - Ergonomics design】 anti-slip rubber coated handle for a more comfortable and saving labor work. Rotate crimp dies】 the tool has 6 dies of 8, 2, 1/0 awg, 4, 1, 6, using rotating heads with a spring loaded locking pin to keep the heads. Durable】 crimper is made of scm-40 hardened steel for a durable and long service life use.

Material: polyolefin. Shrink ratio: 3:1, round diameter: 3/4'', Length: 1. 22m4ft. Annealed 30 gauge bare copper conductor. Nominal od: 0413", conductor stranding: 624/30 Resistant to cuts, abrasion, Water, tears, Oil, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards.

SELTERM 2 Pack 4 Gauge 4 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets #ad - The battery Cable lugs meet S. A. E conductivity standards and are tested to UL 486 with voltage rating of up to 600 V. Rohs Compliant. Made from 100% annealed Tinned Copper for Max Current Flow. This tool has widely application in automatic electronics work.

#ad



2 Pack 3/4 inch 3:1 Dual Wall Adhesive Heat Shrink Tubing Kit, Large Wire Shrinkable Tube Wrap by MILAPEAK 4 Feet, Black & Red

#ad
MILAPEAK #ad - They are also rohs compliant, Formaldehyde HCHO Free, protect you and your famaily from toxins. Milapeak 2 pack 3/4'' 3:1 adhesive-lined heat shrink tubing, Black & Red 4 Feet - Best for appliance/auto electric wire cable harness wrapping, solder joint protection etc. Ergonomics design】 anti-slip rubber coated handle for a more comfortable and saving labor work.

Rotate crimp dies】 the tool has 6 dies of 8, 6, 2, 1, 1/0 awg, 4, using rotating heads with a spring loaded locking pin to keep the heads. Durable】 crimper is made of scm-40 hardened steel for a durable and long service life use. Terminal Type: Uninsulated. Wire gauge: 8 awg, 2/0, 1 awg, 4 awg, 1/0, 6 awg, 2 awg, 3/0 and 4/0.

2 Pack 3/4 inch 3:1 Dual Wall Adhesive Heat Shrink Tubing Kit, Large Wire Shrinkable Tube Wrap by MILAPEAK 4 Feet, Black & Red #ad - Ideal for Battery and Welding Cables. Temco industrial's 1 year free Return and 5 Year Void-Free Warranty. Product upgrade】new 「 hx-50bi 」with 6 dies in awg: 8, 2, 1/0, 4, 6, 1, NOT IN METRIC. Precise dies】hexagonal rotating dies are processed with Wire EDM Cutting, more accurate than normal casting dies.

Comfortable operation】Comfortable grip with antislip surface saves strength and improves user's experience. Solid construction】Made of high quality carbon steel which can offer long service life. Versatilel】compatiable with copper&aliuminum cable lug, non-welding and standard electrical connection.

#ad



25 Feet - Made in the USA - Red - EWCS 2 Gauge Premium Extra Flexible Welding Cable 600 Volt

#ad
EWCSSPEC #ad - Temco easy-flex has a rugged epdM jacket and is highly flexible. We specially thicken and reinforce the metal plate on crimp head. Easy operation】 press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.

High precision jaw design】 crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. Annealed 30 gauge bare copper conductor. Nominal od: 0413", conductor stranding: 624/30 Round diameter: 3/4'', Length: 1. 22m4ft. Good tightness with glue lined: our heat shrink tubing has the advantages of good electrical insulation, High temperature resistance.

25 Feet - Made in the USA - Red - EWCS 2 Gauge Premium Extra Flexible Welding Cable 600 Volt #ad - . 2 gauge premium extra flexible welding cable - red - 600 Volts - Welding lead- Leads for Motors, Generators, Batteries - Nominal Diameter is. 429" - approx 636 strands of 30 AWG copper Material: polyolefin. Resistant to cuts, oil, Abrasion, Water, tears, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards.

Note: make sure temperature of your heat gun is up to 212℉Fahrenheit, group of lines marking, which will be exposed to harsh environments.

#ad



InstallGear 1/0 Gauge Red 25ft Power/Ground Wire True Spec and Soft Touch Cable

#ad
InstallGear IG025R #ad - Making a polarity mistake could be damaging to your audio equipment. Soft touch jacket - the jacket on our cable is designed with the installer in mind. Resistant to cuts, abrasion, Oil, Water, tears, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. Terminal Type: Uninsulated.

Wire gauge: 8 awg, 2/0, 1 awg, 6 awg, 4 awg, 2 awg, 1/0, 3/0 and 4/0. Ideal for Battery and Welding Cables. Temco industrial's 1 year free Return and 5 Year Void-Free Warranty. Product upgrade】new 「 hx-50bi 」with 6 dies in awg: 8, 2, 1/0, 4, 6, 1, NOT IN METRIC. Precise dies】hexagonal rotating dies are processed with Wire EDM Cutting, more accurate than normal casting dies.

InstallGear 1/0 Gauge Red 25ft Power/Ground Wire True Spec and Soft Touch Cable #ad - Comfortable operation】Comfortable grip with antislip surface saves strength and improves user's experience. Solid construction】Made of high quality carbon steel which can offer long service life. Versatilel】compatiable with copper&aliuminum cable lug, non-welding and standard electrical connection. 205 max amps up to 50 feet, rated up to 600 volts, -50°C to +105°C -58°F to +221°F.

The flexibility of this jacket allows for easy routing and has a low memory. Material: polyolefin.

#ad



InstallGear 8 Gauge 25ft Black and 25ft Red Power/Ground Wire True Spec and Soft Touch Cable

#ad
InstallGear IG825R/BK #ad - Thicker wire presents less resistance to current flow. Copper clad aluminum cca - cca wiring provides a good conductor for power transfer. This tool has widely application in automatic electronics work. Manual hammer crimper: recommend 2-4 lb sledge hammer. Round diameter: 3/4'', Length: 1. 22m4ft. Good tightness with glue lined: our heat shrink tubing has the advantages of good electrical insulation, High temperature resistance.

Resistant to cuts, oil, tears, Water, Abrasion, Grease and Flame. Nec article 630 electric welders, meets sae J1127 and ASTM B-172 standards. Temperature range: -55c to +125c, beginning shrinking temperature: 70C, Completely shrinking temperature: 125C. Thicker wire presents less resistance to current flow.

InstallGear 8 Gauge 25ft Black and 25ft Red Power/Ground Wire True Spec and Soft Touch Cable #ad - Copper clad aluminum cca - cca wiring provides a good conductor for power transfer. Rated voltage: 600V. Close end pad seals Out Moisture Keeping Cables Dry. Terminal Type: Uninsulated. Wire gauge: 8 awg, 2/0, 4 awg, 1 awg, 2 awg, 1/0, 6 awg, 3/0 and 4/0. Ideal for Battery and Welding Cables.

#ad